As climate change, urban development, irrigation and other factors are altering the availability of water, it’s important to understand how we use water on a daily basis in the U.S. — and where the opportunities are for using it more wisely.

A recent report from the U.S. Geological Survey (USGS) provides an overview of water withdrawals across the country.

The report includes a few surprises. For example, did you know Idaho withdraws the most water nationwide for aquaculture? That Arkansas — the 33rd most-populous state — withdraws the fifth most water, mainly for crop irrigation? Or that power plants are the largest users of water in the country?

The following maps and data visualizations paint a picture of how and where America uses its water.

322 Billion Gallons per Day

According to the USGS, freshwater and saline water (seawater and brackish coastal water) withdrawals in the in the U.S. in 2015 totaled approximately 322 billion gallons (1.22 trillion liters) per day — 9 percent less than in 2010. This decline occurred even as the U.S. population increased 4 percent. As the map below shows, thermoelectric power generation and irrigation were the dominant uses of this water.

The U.S. used 322 billion gallons of water per day in 2015. That’s a really big number. But how big is it?

On a typical day in the U.S. we withdraw enough water to fill 1,163 Empire State Buildings. While that might sound like a lot of water, in a year we withdraw an amount equal to just 4 percent of the total volume of Lake Superior — the largest of the Great Lakes and the third largest freshwater lake in the world by volume.

Surface Water Is Top Source

The majority of water withdrawals — 61.5 percent or 198 billion gallons (750 billion liters) per day — came from surface water such as lakes, rivers and streams. Approximately a quarter of freshwater withdrawals, totaling 82 billion gallons (310 billion liters) per day, were from groundwater. The remaining 13 percent came from saline sources.

Top Users

The top five states overall for water withdrawals are California (9 percent), Texas (7 percent), Idaho (6 percent), Florida (5 percent) and Arkansas (4 percent). It’s interesting to note that New York — the fourth most populous state in the country with nearly 20 million people — isn’t on the list — showing that water use isn’t directly related to population.

County by County

This USGS map shows total water withdrawals by county. The bigger the circle, the larger the withdrawal. An interactive version of this map can be viewed on the USGS website.

Consumption and Population

Public supply refers to water that is used for domestic purposes — drinking, washing clothes and dishes, bathing, watering lawns, etc. — and public services such as pools, wastewater treatment and firefighting.

According to the USGS, 283 million Americans — 87 percent — got their drinking water from public facilities in 2015. The remaining 13 percent relied primarily on private wells. Nevada had the highest self-supplied domestic per capita use.

New York City receives much of its water supply from the counties in and around the Catskill Mountains north of the city.

Overall, public-supplied domestic water use has declined since 1995 due at least in part to increased consumer awareness, improvements in technologies and leak detection.

Irrigation Hot Spots

Irrigation is most dominant in the American West, home to nine of the top 10 states for irrigation withdrawals. The outlier, Arkansas, is third overall for irrigation withdrawals; there, irrigated water is used to flood rice fields and support a variety of other crops.

Irrigation withdrawals are split pretty evenly between surface water (52 percent) and groundwater (48 percent). Reclaimed wastewater was used for irrigation in 10 states: California, Florida, Arizona, Texas, Utah, Nevada, New Mexico, Colorado, Kansas and Illinois.

According to the USGS, 63.5 million acres (25.7 million hectares) of land were irrigated in 2015, a 2 percent increase over 2010.

Power Generation

Withdrawals for power generation are most dominant in the southern and eastern parts of the U.S., with Texas, Florida, Illinois, Michigan and New York leading the way. Surface water withdrawals account for nearly all of the water used in this category. Most water withdrawn by power plants is returned directly to the source after being used to cool the steam that drives thermoelectric generators.

Overall withdrawals for thermoelectric power declined between 2010 and 2015 — coinciding with a nationwide decrease in coal use and an increase in water-efficient power generation, among other factors.

Industrial Water Withdrawals

Indiana and Louisiana are the two dominant states for industrial water withdrawals. Together they account for 30 percent of industrial use nationwide. In northwestern Indiana these withdrawals are largely for steel production, whereas Louisiana uses large quantities of water for the chemical and petroleum industries in the southeast portion of the state.

Water at Home

Bringing this all closer to home and down to the individual level, according to the EPA, the average U.S. household uses more than 300 gallons of water per day. In a typical residential dwelling, 70 percent of this usage occurs indoors — primarily in the bathroom.

Preparing for the Future

The USGS has been collecting nationwide water withdrawal data since 1950. During that time withdrawals peaked in 1980 and have been mostly declining since.

Water availability has created a pattern of water use and development around the country (for example, we build power plants at the intersection of power need and water source). As development grows and water availability shifts, we may be creating a disconnect between need and availability. To prepare, we need to think about ways to be more strategic about how we tap our water resources — not just conserving, but also segmenting water into different categories and diverting each to the most appropriate use.