Sustainable Development Goals
Project Status:
Controlled Development 2015 | Commercial Applications 2021
Organizations Involved:
Klean Industries, Sika Corporation / Sika USA, Liberty Tire Recycling, Lafarge/Holcim, Cemex and XFibres
Services / Equipment:
Feasibility Studies, Due Diligence, Carbon Management
Klean brought tire-steel recovery, fiber preparation, and concrete applications into one commercial development program, with a clear objective: preserve the wire’s reinforcement value and turn it into a construction product a customer can specify.
We saw a construction product in the steel fraction and developed the processing-to-customer connection around it. The opportunity was already built into the tire. Its steel cord had been manufactured to reinforce a demanding product. We connected that recovered resource with another industry that buys reinforcement every day. For a tire recycler, this opens an outlet for an engineered product. For a concrete producer, it creates a route to recovered steel fibers that earn their place through performance.
Recover the steel. Preserve the reason it was valuable. A recycler can recover wire and sell it by weight. A concrete customer buys a different proposition: controlled fiber dimensions, reliable dosing, consistent dispersion, and tested behavior in the finished mix. Moving between those markets requires deliberate product development.
That distinction changes the investment decision. Recovery conditions, residual rubber and carbon, wire geometry, and handling all affect what the downstream producer receives. The preparation line must deliver a useful reinforcement product at a cost the application can support.
We treated the steel outlet as part of the recovery business from the outset. Oil and recovered carbon need defined customers; the wire deserves the same commercial attention.
Build the product around the concrete customer.
Our feasibility and development work connected recovered tire wire with specialist fiber and construction-material expertise. We examined recovery, cleaning, separation and dimensional control alongside the concrete applications that could use the finished product. The customer specification shaped the preparation route.
This preserves a valuable possibility: suitable recovered wire can be prepared for direct use as fibers without first being remelted and manufactured into new steel reinforcement. The process must still deliver the fiber quality and consistency required by the selected application. The engineering objective is to preserve useful material properties.
Put the product specifications in front of the buyer.
The specialist product documentation gives this opportunity a concrete scale:
| Documented product characteristic | Published value |
|---|---|
| Fiber tensile strength | At least 1,500 MPa |
| Fiber population | Approximately 54,500 fibers per kilogram |
| Typical stated dimensions | 15–40 mm long; 0.3–0.7 mm diameter |
At an illustrative 20 kg/m³, that fiber count equates to approximately 1.09 million fibers in a cubic meter of concrete. This is a quantity illustration, not a mix prescription or proof of uniform distribution. The values describe the documented product, not every recovered-wire stream.
The construction opportunity spans industrial floors, foundations, parking areas, pavements, and precast and sprayed concrete. Specialist literature advertises savings of up to 30% against traditional reinforcement, alongside faster progress and reduced site-storage needs. These are supplier-stated opportunities requiring project comparison. The engineered design determines slab thickness, joints, concrete class, fiber dose, and any supplementary reinforcement.
For Klean, the significance is commercial: the recovered material can be developed around an installation task and a finished construction product. That gives the recycler a customer specification to manufacture against, and gives the concrete producer a proposition to take to its own buyers.
Give the reinforcement a defined job in the mix.
Steel fibers distributed through concrete can bridge cracks and help the material carry load after cracking. That makes residual strength, toughness and crack-opening control central to the product proposition. Industrial floors, pavements and precast products offer application routes where those properties matter to the customer.
We connect fiber preparation with batching, mixing and the required concrete performance. Where the engineered design permits, fiber reinforcement can also reduce conventional reinforcement placement. The purchasing decision can then include reinforcement handling, placement labor, and the construction sequence alongside the material invoice. Those are practical reasons for a contractor to examine a recovered-fiber solution. Each design establishes the permitted substitution; recovered wire is not an automatic replacement for reinforcing bars.
The commercial question is practical: can this recovered steel deliver the specified performance, reliably, at a competitive total application cost? Our development program brings the processing and construction sides together to answer it.
A construction-product route for a material already leaving the recycling plant.
We completed feasibility and product-development work linking tire-steel recovery with concrete reinforcement. Our work drew on internal research, pilot testing, field applications, and specialist collaboration to connect the recovered material to its construction market.
For the recycler, the outcome is a defined route to develop the steel fraction beyond bulk scrap sales. For a group that both recovers tires and manufactures concrete, the buyer may already be inside the business: prepare the wire to specification, incorporate it into an accepted mix, and sell the construction product. For the concrete producer, it is an additional reinforcement product to qualify for its own range. The value comes from retaining the wire's useful properties and matching them to a paying application.
Independent evidence supports the technical opportunity. A University of California Pavement Research Center laboratory study found that the tested recycled steel fibers performed similarly to the best-performing steel fiber for residual strength and toughness, and better than other tested steel fibers. The researchers recommended further pavement evaluation. This supports product development around the selected material and dosage, rather than assuming every recovered-wire stream performs alike.
European Technical Assessments also exist for specified concrete fibers recovered from end-of-life tires. They demonstrate a product-assessment route for this category. Acceptance remains specific to the fiber product and the intended market.
Retain the steel’s function and evaluate the carbon benefit.
Our original assessment identified potential embodied-carbon reductions of up to 60% against its conventional reinforcement comparator. This was a preliminary substitution estimate, not a measured reduction for every project. The opportunity comes from the actual production steps displaced, including potential avoidance of remelting and new-fiber manufacture. Recovery, finishing, transport and the fiber quantity needed for equivalent performance determine the result.
For a producer facing pressure on both costs and embodied carbon, that is a compelling development brief: a reinforcement product with recovered content, a practical supply route and performance established against the application. Klean connects those requirements before committing to investment.
A worn-out tire can leave a recycler with several saleable products. We developed the steel fraction with the same attention to its next customer as the oil and carbon. The steel has already done one demanding job; our work connects it with the next. That is the commercial shift: recover the material, preserve its useful properties, and build the next customer into the process.
1. Design the steel outlet as a product business.
Define the concrete application and customer specification before fixing the recovery and finishing equipment.
2. Preserve performance through the recovery process.
Cleaning, geometry, consistency, and batching govern whether recovered wire becomes a dependable reinforcement ingredient.
3. Sell the construction outcome.
Build the offer around the specified concrete performance, placement requirements, and total installed cost. Compare carbon on the same functional basis.
These takeaways highlight selected lessons from this case study, not an exhaustive account. Klean brings deeper technical expertise and commercial insight to each project through tailored engagements.
If your tire-recovery business sells steel, or your concrete business buys reinforcement, there may be a product opportunity between you. Klean can connect the feedstock, preparation technology, concrete testing, and commercial supply model needed to develop it.
Bring us your recovered-wire stream or your concrete specification. New processing equipment begins with a paid Detailed Equipment Quotation (DEQ), progresses through a Detailed Feasibility Study (DFS), then moves to Front-End Engineering Design (FEED) after the agreed decision gate. Existing-material and product-development assignments can begin with a separately scoped paid assessment.
Turn Your Recovered Tire Steel into a Concrete Product >> GO.
ABOUT THE INFORMATION PRESENTED
This case combines our completed project record with relevant product assessments and published research. Fiber specifications and the up-to-30% reinforcement-saving statement come from specialist product documentation. Market and emissions figures retain the original assessment basis. Product performance and commercial deployment are developed for the selected material, process, application, and customer requirements.
This project considers the United Nations Sustainable Development Goals through the pathways described in the WBCSD Tire Industry Project’s report, “Sustainability Driven: Accelerating Impact with the Tyre Sector SDG Roadmap”.
We support our client’s through our quoting and project development by providing a wealth of information and specifications about Klean Industries systems and technologies.
©2026 All Rights Reserved. Terms of Use