Illustration of a road roller and paving crew laying fresh asphalt beside green woodland.

From Tire Fiber to Tougher Roads: Turning Fiber Waste into Performance Asphalt

Sustainable Development Goals

Project Status:
Controlled Development 2021 | Commercial Applications 2025
Organizations Involved:
Klean Industries, Confidential Development Partners
Services / Equipment:
Feasibility Studies, Design & Engineering, Packaged Solutions

The textile reinforcement inside a tire still has a role to play even after the tire has worn out. Klean’s Detailed Feasibility Study for a confidential asphalt manufacturer outlined a way to incorporate the recovered fiber into road construction. This involves preparing the fiber as a controlled additive that stabilizes the binder and reinforces the asphalt mixture.

We successfully matched a challenging recycling fraction with a product an asphalt plant already needs. This creates a commercial opportunity that benefits both parties involved: a new outlet for the recycler's material and an alternative performance additive for the road producer. The next customer for the fiber becomes an integral part of the recovery process.

The Challenge

A reinforcement material needs a second market. Tire processing recovers textile fiber alongside rubber and steel. Without a suitable outlet, that fraction can end up in energy recovery or disposal. Our study focused on retaining its useful function in a construction product.

The asphalt producer has an immediate use to examine. Stone mastic asphalt needs its binder-rich mortar to remain evenly distributed through handling and placement. The finished pavement must then cope with repeated traffic, temperature changes and water. A useful additive has to work in production and in the road.

That is the connection Klean developed: an available recovered fiber, a defined asphalt function and a preparation route that makes the material practical for the customer.

The Solution

One prepared additive. Two functions in the road. The product route combines binder stabilization with dispersed reinforcement. Specialist product information identifies resistance to binder drainage and segregation, together with improved rutting, moisture, frost, and cracking behavior in suitable formulations. These are application targets for the selected mix, not benefits assumed from adding untreated tire fluff.

We connected mechanical fiber recovery with controlled preparation and the asphalt producer’s handling requirements. The documented formulation uses a blend of polyester, polyamide, aramid and viscose fibers, activated, modified and granulated. Preparation turns a variable recovered fraction into a material that can be dosed consistently.

Small addition rates create a meaningful product outlet.

Technical-sheet guidance Published specification
Addition rate 0.2–0.6% of finished asphalt mix mass
Equivalent consumption 2–6 kg per tonne of asphalt
Granule dimensions 5–25 mm long; 5–7 mm diameter
Bulk density 410–460 kg/m³

For an illustrative 100,000-tonne annual asphalt program, that range represents 200–600 tonnes of prepared additive. This is a demand illustration, not the confidential client’s throughput or a prescribed formulation. It shows how a modest addition rate can create a material outlet worth designing into a recycling business.

Make the product fit the plant. The distributor describes compatibility with existing stabilizer dosing equipment, moisture-resistant granules, and supply in bags or bulk bags. It lists roads, urban streets, and airfields among application markets. The plant and formulation establish actual feeder settings, mixing sequence, and customer acceptance.

Our study connects those operating details with preparation yield, delivered cost, and supply reliability. The recycler needs to know what it takes to manufacture an accepted additive. The asphalt producer needs a material it can use repeatedly, without turning every delivery into a new development exercise.

The Outcome

A product pathway with a buyer’s reason to purchase. Klean’s feasibility work established the link between the recovered textile fraction and an asphalt additive that supports stabilization and reinforcement. That creates a commercial route around the fiber’s function, with processing and qualification linked to the customer from the outset.

The supplier’s published comparisons show why this application deserves commercial attention:

Supplier-published comparison Scope of the claim
Lower additive purchase cost Polish-market price described as 1.6–1.75 times lower than cellulose additives; no local quotation implied.
Approximately 25–40% longer pavement life Supplier-estimated service-life extension; not measured in Klean project life.
Approximately 20–30% lower annualized GWP Supplier comparison normalized to estimated SMA pavement life versus cellulose; depends on the life-extension assumption.

These comparisons support project evaluation, not guaranteed savings. Check additive price, dosage, and the validity of the pavement-life assumptions for the actual mix and market.

For Klean, the investment case starts with the near-term transaction: the cost to prepare and deliver an accepted additive, the customer’s alternative, and the volume the customer can commit to. Include longer maintenance intervals and lifecycle-carbon benefits in the model when performance evidence supports them. The same benefit is counted once.

For the recycler, this gives a difficult fiber stream a defined route to revenue. For the asphalt business, it creates a product-development opportunity around a function already present in its buying specification. For an integrated construction group, the recovered material and its next customer can sit within the same business.

The tire’s textile cord was engineered to reinforce a product under demanding service. We developed a commercial route to make that recovered resource work again. The opportunity becomes tangible when the recycler can name the product, the asphalt producer can specify it, and both can agree on the supply.

3 PROJECT TAKEAWAYS

1. Develop the additive around an asphalt buyer.

The required stabilization, reinforcement, and plant-handling performance determines the preparation process.

2. Turn a small dose into a credible supply market.

Connect the agreed addition rate with annual asphalt production, then size the fiber preparation business around qualified demand.

3. Separate purchase savings from lifetime value.

Validate delivered additive cost first; use service-life and carbon benefits only with their supporting formulation and assessment basis.

These takeaways highlight selected lessons from this case study, not an exhaustive account. Klean brings deeper technical expertise and commercial insight to each project through tailored engagements.

WHAT DO THESE LESSONS MEAN FOR YOUR PROJECT?

Your recovered tire fiber could become an ingredient an asphalt producer orders. Klean can connect feedstock, fiber preparation, plant integration, testing, and the commercial supply model.

Bring us your fiber stream or your asphalt specification. New processing equipment follows a paid Detailed Equipment Quotation (DEQ), Detailed Feasibility Study (DFS), and Front-End Engineering Design (FEED), with agreed decision gates. Existing plants and application-development work can begin with a separately scoped paid assessment.

Turn Your Tire Fiber into an Asphalt Product >> GO.

LEARN MORE

ABOUT THE INFORMATION PRESENTED

This case describes Klean’s Detailed Feasibility Study for a confidential asphalt manufacturer. Supplier identities and proprietary details are withheld. Technical specifications and comparative economic/environmental claims are drawn from specialist product documentation, not measured Klean project results. Dosage follows the technical sheet’s finished-asphalt-mass basis. The annual demand example is illustrative. Product qualification, local acceptance and commercial terms are established for each project.

This end-of-life-tire application considers the United Nations Sustainable Development Goals through the WBCSD Tire Industry Project’s Sustainability Driven: Accelerating Impact with the Tyre Sector SDG Roadmap. Environmental results depend on the actual process, displaced additives, transport, and pavement service life.

Chat on
Telegram