Sustainable Development Goals
PROJECT AT A GLANCE:
Project Status:
Detailed Feasibility Study
Organizations Involved:
Klean Industries (client confidential)
Services / Equipment:
Feasibility Studies, Design & Engineering, Packaged Solutions
The Fiber the Cement Kiln Would Burn Can Carry Your Road. Tire recycling recovers the tire's steel, carbon black, and oil, then sets aside a stream the industry still treats as waste: the tire's textile fiber. Today that fiber goes mostly to the cement kiln or the landfill. Klean's Detailed Feasibility Study for a confidential asphalt manufacturer in Pennsylvania showed the fiber has a higher-value home, as a stabilizing and reinforcing additive in road asphalt.
Give the fiber a job instead of a disposal route. Modern tires are built around high-strength synthetic textile cords engineered to carry load. When a tire is recycled, those fibers are separated out, and because they hold calorific value but have little obvious market, the recovered stream is usually burned in a cement kiln or landfilled, a disposal cost dressed up as a use. A recycler recovers the textile fraction alongside rubber and steel. Still, before an asphalt producer can use it consistently, the material must undergo further preparation: residual rubber, fiber composition, moisture, and handling characteristics all shape the route to a usable product.
The road producer faces a different problem. Stone-mastic asphalt and other gap-graded mixes carry a relatively rich binder system. During hot storage, transport, and placement, that binder can drain away from the aggregate unless it is stabilized. Once laid, the pavement must withstand repeated traffic loads, temperature cycles, and water. The industry's incumbent stabilizer, cellulose fiber from recycled paper, holds the binder but adds little reinforcement.
Recover the tire's own reinforcement and re-engineer it for the mix. The application uses textile cord recovered through mechanical tire processing. Further cleaning and controlled blending prepare the fiber fraction for activation, modification, and pelletizing into a blend of polyester, polyamide, aramid, and viscose fibers, with composition controlled to the application. That recovery-to-pellet route is the heart of the work: it turns a difficult recovered fraction into a material that can be stored, transported and metered into an asphalt plant.
Combine binder stabilization with dispersed reinforcement. The prepared fibers do two connected jobs. They hold binder within SMA and other gap-graded mixtures during production and placement, preventing drainage, delamination, and segregation. Distributed through the mix, they also reinforce the binder and fine-aggregate structure. Compared with cellulose, tire-derived synthetic fibers give a more optimal degree of binder adsorption, so the same addition delivers genuine microstructural reinforcement rather than drainage control alone. The product information identifies improved resistance to rutting, water, and frost, together with reduced susceptibility to thermal and fatigue cracking. A stated dosage range of 0.2 to 0.6 percent by mass of mix, roughly two to six kilograms per tonne, is a starting point for formulation, finalized through mix design and plant trials.
Make the material practical at the plant. Pelletized fiber is introduced through standard mechanical or pneumatic additive feeders, creating a route into established asphalt production without bespoke equipment. The dosing arrangement is checked against the plant's equipment and mixing sequence; the operating detail a recycler and a producer both need settled before either commits.
A stream with a disposal cost today becomes a reinforcement product tomorrow. The study establishes a practical product pathway: prepare a controlled fiber, deliver it in a usable form, and qualify it against the road producer's specification. The value lies in connecting a recycling output to a function an established industry already needs.
For a recycler, a qualified asphalt outlet turns the textile fraction from a disposal burden into revenue and improves the economics of the whole recovery line. For the producer, a single additive covers both binder stabilization and reinforcement. And because recovered tire fiber carries the lowest carbon footprint of the stabilizing additives in use, and extends pavement life, a lifetime carbon benefit sits on top of the recovery income. This is the inversion Klean develops across its portfolio: the least-valued output of one process becomes the most-valued input of another. The fiber does not belong in a cement kiln. It belongs in the road.
1. Define the asphalt product before sizing the recovery line.
The producer's fiber and handling requirements determine which preparation steps are necessary and what the recovered stream can earn.
2. Evaluate the full mixture.
Assess binder retention, reinforcement, workability, and durability together when selecting the fiber dose and binder content.
3. Build qualification into the investment scope.
Laboratory work, plant trials and customer acceptance connect equipment expenditure to a credible product market.
These takeaways highlight selected lessons from this case study, not an exhaustive account. Klean brings deeper technical expertise and commercial insight to each project through tailored engagements.
If you recover tire fiber or manufacture asphalt, we can define the connection between your available material and a product your customer can specify. We develop and license resource-recovery technology and integrate equipment around defined feedstocks and product requirements, covering fiber preparation, equipment integration, the testing program, and the commercial supply model. For a new processing line, a paid Detailed Equipment Quotation (DEQ) establishes the preliminary scope and commercial basis, a Detailed Feasibility Study (DFS) develops viability, and Front-End Engineering Design (FEED) follows the DFS. Existing facilities can begin with a separately scoped paid integration assessment.
Bring us your recovered fiber, your asphalt specification, and your current disposal route, and we will determine whether your tire fiber can carry the road and what it will take to qualify.
Turn Your Tire Fiber Into a Road-Worthy Additive >> GO.
LEARN MORE
ABOUT THE INFORMATION PRESENTED
This case reflects a Klean Detailed Feasibility Study for a confidential asphalt manufacturer in Pennsylvania. Client identities and third-party technology sources are withheld by agreement. The performance figures for recovered tire fiber are drawn from published product and technical documentation. They must be confirmed for the selected formulation and supply chain through mix design, plant trials, and customer acceptance. This work aligns with UN Sustainable Development Goals 9, 11, 12 and 13. Proprietary information and facility access require the relevant permissions; an inquiry, NDA, or paid engagement does not automatically authorize disclosure or access.
We support our client’s through our quoting and project development by providing a wealth of information and specifications about Klean Industries systems and technologies.
©2026 All Rights Reserved. Terms of Use